Page 4 of 14
Intended Use
The NorTrac 3-Pt. Box Scraper features a rugged, welded, steel frame and reversible 1/2" x 6" high-
carbon, steel blade. The scraper is a category 1, 3-point hitch.
Technical Specifications
Location
Description
4
’
5
’
6’
#51448
#51449
#51450
A
Box Overall Height
34-5/8"
34-5/8"
34-5/8"
B
Maximum Ripper Height
3-5/8"
3-5/8"
3-5/8"
C
Maximum Ripper Depth
3"
3"
3"
D
Box Height
17-1/2"
17-1/2"
17-1/2"
E
Ripper Adjustment
2-1/8"
2-1/8"
2-1/8"
F
Box Overall Width
48"
60"
72"
G
Box Over Depth
29-1/4"
29-1/4"
29-1/4"
Important Safety Information
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this box scraper.
Always be aware of the environment and ensure that the box scraper is used in a safe and
responsible manner.
Do not allow persons to operate or assemble the box scraper until they have read this manual
and have developed a thorough understanding of how it works.
Do not modify this box scraper in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the product. There are specific applications for which the
box scraper was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
be safer and do the job better at the capacity for which it was intended. DO NOT use this box
scraper for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
WORK AREA SAFETY
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the box scraper in confined work
areas may put you dangerously close to other cutting tools and rotating parts.
Do not allow the box scraper to come into contact with an electrical source. The box scraper is not
insulated and contact will cause electrical shock.
