8
2.3 Layout
Handle (1)
Jig welded steel construction including 2 rubber grips. A dead-man handle (7) allows the operator to
work safely and to stop the machine at any moment. The angle of the machine arm can be adjusted
to operate the machine comfortably.
Pitch of the blades (2)
The pitch of the blades is controlled over a knob on the handle.
Belt drive and belt cover (3)
A centrifugal clutch inside the engine pulley drives the gear shaft through V-Belts. It allows to
gradually engage the tool rotation. The drive assembly is enclosed in a metal guard.
Safety guard ring (4)
A safety guard ring protects the operator from the rotation of the tool while offering an optimum
view of the working progress. This ring can rotate, in order to ease the finishing of floor up to walls.
Thermal Engine (5)
The machine has a GX120 Honda engine, with 2,9kW. The dead-man handle (7) allows an
immediate stop of the machine in case of danger.
Lifting eye (6)
To lift the machine easily and safely, a lifting eye is located over the engine. This allows a balanced
lifting of the machine.
