Norton CS 451 P13 Operating Instructions And Spare Parts List Download Page 25 | Manualshive

Page: 25 / 28

background image

25

Guarantee can be claimed and technical support obtained from your local distributor where
machines, spare parts and consumables can be ordered as well:

Benelux and France:

From Saint-Gobain Abrasives
in the Grand-Duché de Luxembourg
Free telephone numbers:
Belgium  :  0 800 18951
France: 0 800 90 69 03
Holland: 0 8000 22 02 70
e-mail:

[email protected]

Germany
Saint-Gobain Diamond Products GmbH

Birkenweg 45-49,
D-50389 WESSELING
Tel : (02236) 8911 0
Fax : (02236) 8911 30
e-mail:

[email protected]

Spain
Saint-Gobain Abrasivos S.A.
C/. Verneda del Congost s/n
Pol.Ind. El Pedregar

E-08160 MONTMELÓ (Barcelona)
Tel: 0034 935 68 68 70

Fax: 0034 935 68 67 14
e-mail:

[email protected]

Hungary
Saint-Gobain Abrasives KFT.
Banyaleg Utca 60B
H-1225 BUDAPEST
Tel: ++36 1 371 2250

Fax: ++36 1 371 2255
e-mail:

[email protected]

Czech Republic

Norton Diamantove Nastroje Sro
Vinohrdadska 184
CS-13000 PRAHA 3
Tel: 0042 0267 13 20 21
Fax: 0042 0267 13 20 21
e-mail:

[email protected]

United Kingdom

Saint-Gobain Abrasives Ltd.
Doxey Road
Stafford
ST16 1EA
Tel : 0845 602 6222
Free fax : 0800 622 385
e-mail :

[email protected]

Italy
Saint-Gobain Abrasivi S.p.A.

Via per Cesano Boscone, 4
I-20094 CORSICO-MILANO
Tel: 0039 02 44 851
Fax: 0039 0245 101238
e-mail:

[email protected]

Austria
Saint-Gobain Abrasives GmbH
Telsenberggasse 37,
A-5020 SALZBURG

Tel: 0043 662 43 00 76 77
Fax: 0043 662 43 01 75

e-mail:

[email protected]

Poland
Saint-Gobain Diamond Products Sp.zO.O.
AL. Krakowska 110/114
PL-00-971 WARSZAWA
Tel: 0048 22 868 29 36
Tel/Fax: 0048 22 868 29 27

e-mail:

[email protected]

«
...
23
24
25
26
27
...
»

Summary of Contents for CS 451 P13





























Reviews:

No comments

Related manuals for CS 451 P13

Brand: Makita Pages: 3

Brand: Makita Pages: 15

Brand: Makita Pages: 8

Brand: Makita Pages: 56

Brand: Makita Pages: 4

Brand: Makita Pages: 37

Brand: Makita Pages: 47

Brand: Oliver Pages: 18

Brand: Target Pages: 36

Brand: TOPMAQ Pages: 15

Brand: ATIKA Pages: 44

Brand: Clarke Pages: 16

Brand: Parkside Pages: 112

Excalibur EX-16

Brand: Axminster Pages: 36

Brand: Grizzly Pages: 80

Brand: FLORABEST Pages: 57

Brand: Parkside Pages: 92

Brand: Parkside Performance Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands