Norton CM 351, Operating Instructions Manual

Page: 6 / 16

6
1 BASIC SAFETY INSTRUCTIONS
The CM 41 is exclusively designed for the cutting of construction products, with NORTON diamond blades, mainly on construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations. The manufacturer shall not be held
responsible for any resulting damage. Any risk shall be borne entirely by the user. Observing the operating instructions and compliance
with inspection and servicing requirements shall also be considered as included under use in accordance with the regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following symbols are used on the machine :
Read operator’s instructions Ear protection must be worn Hand protection must be worn
Eye protection must be worn Danger: risk of cut Rotation direction of the blade
1.2 Machine plate
Important data can be found on the following plate located on the machine:
1.3 Safety instructions for particular operating phases
Before commencing work
•
Before commencing work, make yourself familiar with the working environment at the place of use. The working environment
includes: obstacles in the area of work and manoeuvre, the firmness of the floor, necessary protection at the site relating to
public thoroughfares and the availability of help in the event of accidents.
•
Check for correct mounting of the blade regularly.
•
Immediately remove damaged or badly worn blades, as they endanger the operator whilst rotating.
•
Only fit NORTON diamond blades to the machine! The use of other tools can damage the machine!
•
Please wear safety goggles and a dust mask when cutting dry to minimize the effects of dust.
•
For security reasons, never leave the machine unattended, untied or unlocked.
While the motor running
•
Do not move the machine whilst the blade is running idle.
•
Always cut with the blade guard in position.
•
Apply cooling water continuously whilst cutting and in good time!
Machine Model Machine Code Year of production
Max. blade diameter
Machine Type Serial Number Safety standard Power Blade Speed
Bore diameter
Weight