Norton Clip-on, Owner'S Manual

Page: 15 / 20

Pairing is the process for linking the headset with your Bluetooth enabled mobile
phone. After this process is completed, you can use the Bluetooth Headset with the
paired mobile phone. The Bluetooth Headset can be paired with up to 8 compatible
phones but connected to only one phone at a time.
1. Press and hold the Power/Send/End key for 5 seconds to turn on the
BluetoothHeadset and make sure the headset is within 10 meters range from the
mobile phone.
2. Press and hold volume up and volume down key together for about 2 seconds.
The blue and red LEDs flash alternatively. Release both buttons and the headset is
now in the pairing mode.
3. Activate the Bluetooth connection with the mobile phone according to the
mobile phone's user's guide.
4. Set the mobile phone to search for the Bluetooth devices according to the mobile
phone's user's guide.
5. Select the Bluetooth Headset from the phone menu.
6. Enter the pin code 0000 to connect (or “pair”) Bluetooth Headset to the phone.
The Bluetooth Headset beeps once and the status indicator flashes blue twice
quickly every 8 seconds indicating the Headset is connected to the phone.
If the headset is turned on within 10 meters from several paired phones, the
headset will try to connect to the last connected phone within 20 seconds. If the
headset does not connect to the last connected phone (for example, the paired
phone is turned off or it rejects the connection), blue light will be flashing every
5 seconds indicating it is in power on however not engaged status.
7. Refer to Operation section to start using the headset.
Pairing to a Bluetooth mobile phone
What does sound / light means
Status
Lights 1 second and beeps once
Flashesonce in 5 seconds
Flashes twice quickly every 8 seconds
Flashes 3 times every 1 second
Lights 1 second and beeps once
Solid Light
Flashes twice quickly every second and the
headset beeps every 20 seconds
Flash alternatively for about 3 minutes
Flash alternatively every 5 seconds
Blue Light
Red Light
Blue / Red
Light
Status Indicator
Mode
Power on but
not engaged
Headset and phone
are being connected
Turning on
Incoming Call
Turning off
Battery Charging
Battery low
Pairing
Line Busy
2 | 8 29