Norton Clipper CB 511, Operating Instructions Manual

Page: 18 / 36

VERS.2017.11.21 CB511_CB 651_MAN_EN
18
4
TRANSPORT
4.1 Security
The machine, given its exceptionally sturdy enbloc structure, can be easily shipped without requiring
any disassembly operation: however it is important to keep to the following precautions:

Make sure that hoisting or anchor cables do not rest on fragile parts, on protective covers or on
tubes that protect the electrical system;

For fixing the machine with strap or rope use exclusively through the appropriate place on the
frame (Pic.1a);

Avoid sudden blows or jolts both during hoisting and when setting the structure back down;

During long trips on roads which are not particularly straight it is very important to firmly anchor
the structure to the transport vehicle to prevent accidents caused by speed during curves,
bumps or slopes;

All machines have special holes or hooks for hoisting. Please use these insofar as possible to
avoid the problems specified above.
4.2 Hoisting

The machine can be hoisted using a special hoisting hook. Use a standard market hoisting hook
connected to a chain or cable with a minimum hoisting capacity of 300 Kg. (Pic. 1a).

The machine can also be hoisted by a lift truck, introducing the forks below the base of the
machine (Pic. 1b).
4.3 Moving small movements
Pull the drawbar all the way out (Pic. 2). Slightly lift the machine and push it in the desired direction.