13
The red valves at stern are here juste in case of
overpressure. If the pressure inside the sponsons is to
high (while the kayak is exposed to the sun for
instance) these valves release automatically some air
and you can hear a hissing sound.
Now inflate the high pressure sponsons. There
are 2 sponsons on each side, which means 4 in
total.
You can find the adapter for the valves in the
repair set.
Put it onto the pump.
The inflating valves have to positions that you
can adjust by pushing and turning the white pin
in the middle.
In one position you can inflate
and disconnect the pump without letting the
air out
again.
If you want to deflate, push in the pin and do a
half turn. The valve stays open.
Best is
first to inflate the lower sponson on
one side to around 50%,
then on the other side
equally. Then change again and fully inflate them
in turns.
Proceed likewise with the upper sponsons.
The ideal pressure is 0.2-
0.25 bar
(2.9-3.63psi)
Do not exceed it!
Your
scubi 2 XL
is now fully assembled and ready for use.
The following instructions cover the installation of all accessories:
•
rudder system
•
deck
•
3rd seat
•
Drop Stitch inset
•
extra high backrest
•
nortik kayak sail
Please find at the end of this manual
important information
regarding disassembly, transport, salt
water use and security matter.
