background image

2.

Press the UP or DOWN button to find the one you want to delete.

3.

Press the DEL button.  The unit will prompt you the deletion of the current phonebook
entry and the LCD display will show 

DELETE RECORD?

4.

Press again the DEL button to delete.  The LCD display will show  

DELETED!

and return to Standby mode.

CALLER ID OPERATION

IMPORTANT:

 

Subscription to Caller ID on Call Waiting services from your local phone

company is required for using the Caller ID on Call Waiting features of the 35828A.  Your
new 35828A telephone gives you the ultimate in cordless telephone sound quality with
the luxury of Caller ID on Call Waiting.
If this is your first cordless telephone, you will soon discover that your cordless is similar
to regular telephones, except without the cord.  If you have owned a cordless in the past,
you will discover that the 35828A  telephone is the most powerful and full-functioned
Caller ID on Call Waiting cordless telephone on the market, some key features are:

40 name and number Caller ID on Call Waiting memories (Caller List)

20 name and number phonebook on base, 30 on handset

Hearing aid compatibility

Frequency Hopping Digital Spread Spectrum radio communication technology

Unlike regular telephones, your cordless telephone does not work during power failures.
We do not recommend you to use a cordless telephone as the only phone in your residence.

INTRODUCTION TO CALLER ID ON CALL WAITING

The 35828A  Caller ID on Call Waiting devices allow you to take advantage of the Caller
Identification Delivery service offered by your local telephone company. For more information,
you can refer to the following Question and Answer table:

21

Summary of Contents for Bell Phones Excursion 35828A

































Reviews: