background image

 

1

                                                                                                                 

11159A-1

                                                        

 

 
 
 
 
 
 
 
 
 

OWNER’S MANUAL#76510  ver.11159A-1    
Page1 

    English Version

 

 

IMPORTANT SERVICE INFORMATION

 

Read this manual before attempting to setup or use this instrument.  It contains important 
information regarding safe installation and use.  Keep this manual for future reference.  
Also save the carton, packing and proof of purchase to simplify and accelerate any needed 
action. If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 
p.m. Pacific Standard Time, Monday through Friday. You can also visit our web site at 
http://www.nwbphones.com for technical support and information on our other products. 
 

  

WARNING

 

To prevent fire or shock hazard, do not expose this product to rain or any type of excess 
moisture. If accidentally dropped into water, the AC adaptor should immediately be 
unplugged from the wall along with the telephone line cord.

 

 
 
 

                          

THIS SYMBOL IS INTENDED TO ALERT THE USER OF  

 

THE PRESENCE OF IMPORTANT OPERATING AND 

  

MAINTENANCE (SERVICING) INSTRUCTIONS IN THE 

 OWNER'S 

MANUAL

.  

 

 

EasyTouch

®

 

II 76510 

20 NUMBER MEMORY/CID/SPEAKERPHONE 

 

CARTON CONTENTS

 

 

 

 

 

  Handset and Base Unit

 

 

 

   Handset Cord  

 
 

   Long Telephone Line Cord 

          
 

  Short Telephone Line Cord 

 
 

   Wall Mount Bracket  

 
 

   User’s Manual 

 
 

   Warranty Card 

 

 

 

 

 

   Accessory Order Form

Summary of Contents for 76510-1

















Reviews: