order to replace the lamps.
Gently slide the front panel towards the top of the fire and remove. Store safely out of the
way whilst the bulb is replaced so that it does not get damaged.
At the bottom of the fire there is a lamp cover fixed by
four
Phillip's head screws, remove
the screws and lift off the lamp cover-see
Fig.5
.
For access to the bulbs, carefully slide the flexible rotisserie to one side ensuring that the
rubber grommet is not lost-see
Fig.6.
Remove the screws and lift off the light barrier-see
Fig.7
.
Remove the defective bulb by pulling it out of the holder.
Replace with a 40W G9 Halogen Bulb. Take care not to touch the bulb with bare hands and
ensure that the bulb is pushed home.
Refit the rotisserie making sure that the rubber grommet is carefully pushed into the slotted
hole on the bracket.
Lift the fire back onto the wall and replace the glass front by lifting onto the lugs either side
of the fire. Ensure that the lower bracket is screwed to the wall.
Cleaning and Maintenance
Warning- Always disconnect from the mains supply before cleaning heater.
For general cleaning use a soft clean duster - never use harsh abrasive or cleaners.
The glass viewing screen should be cleaned carefully with a soft cloth. DO NOT use
proprietary glass cleaners.
Technical Specification
Supply: 110-120V~ 60Hz
Rated power: 1500W
Lighting: 3x 40W G9 Halogen bulb
Summary of Contents for EF422S
Page 2: ......
