SUPERTOW 1
9
4.3
Handle Assembly (assemble while still on crate pallet)
•
Front side handle bolt is pre-installed; leave in place.
•
Slide handle gently into end of bracket
•
Insert Top Bolts (use included flat washers); tighten fully
•
Insert back side bolt (use included washers on each side)
•
Tighten side bolts fully
4.4
Attach Control Cables (leave green tape on until fully done with these steps)
•
Attach throttle body assembly and brake lever
•
Attach lower clutch cable to lower handle.
•
Fasten above cables to handle with 3 tie wraps (shown on completed handle).
