NorthStar Explorer 710 VHF Operation And Installation Manual Download | Manualshive

Page: 10 / 57

background image

10

Northtstar

Explorer VHF Series: 710US, 710EU

Operation and Installation Manual

Press + or - to step through the available channels one at a time, or hold down
to scroll rapidly through all the available channels. See Appendix C for a listing of
channel charts.

Alphanumeric Entry.

This key can also be used for menu selection and for alpha-

numeric entry. Press + or - to scroll the cursor up or down menu options when
navigating menus.

When editing an item containing only numbers, press - to count through the
numbers or hold down to scroll rapidly.

To enter a character, press + to step through the alphabet or hold down to scroll
rapidly.

ENT

Enter.

Use ENT when navigating menus, to conﬁ rm entries and edits.

ESC

Escape.

Use ESC when navigating menus, to clear incorrect entries, to exit from a

menu without saving changes, and to back up to the previous screen.

CALL/MENU

DSC Setup Menu

and

DSC Call Menu

.

710US and 710EU only.

Press to enter the DSC

Call Menu and make DSC calls. See Section 5.

Hold down to enter MENU SELECT. Scroll to DSC SETUP to setup your MMSID and
other DSC information. Go to RADIO SETUP to customize your Northstar VHF radio.
See Section 4.

MENU

Radio menu.

7000 only.

Press to enter the Radio Menu and customize your Northstar

VHF radio. See Section 3.

DISTRESS

Send DSC Distress Call.

710US & 710EU only.

See Section 6.

PTT

Press To Talk.

Press PTT to transmit at any time on an allowable channel. This auto-

matically exits you from menu mode and stops scanning. You must release PTT to
receive a signal.

If PTT sticks, a built-in timer will automatically shut down a transmission after ﬁ ve
minutes and sound the error beeps.

This time out is required by FCC regulations.

Note:

VHF 710CAN operation is the same as VHF 710US. Technical and DSC speciﬁ cations for VHF

710CAN are the same as VHF 710EU

«
...
8
9
10
11
12
...
»

Summary of Contents for Explorer 710 VHF


























































Reviews:

No comments

Related manuals for Explorer 710 VHF

Brand: Garmin Pages: 8

Brand: Garmin Pages: 48

Brand: Garmin Pages: 2

Brand: Nady Audio Pages: 2

Zlinx Xtreme ZXT9-RM

Brand: B&B Electronics Pages: 163

Brand: Zebra Pages: 4

Brand: JBL Pages: 9

Brand: Philco Pages: 7

Brand: EDIFIER Pages: 6

Brand: Cirronet Pages: 27

Brand: camry Pages: 48

Brand: Blaupunkt Pages: 16

Brand: ZUM Radio Pages: 40

Brand: Raveon Pages: 32

65 11 0 406 351

Brand: Sirius Satellite Radio Pages: 8

Brand: Fell Marine Pages: 9

Brand: Harken Pages: 2

Brand: Improvements Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands