NorthStar 972, Installation Manual

Page: 19 / 46

972 Installation Manual, Rev. B Page 15
Mounting and wiring the 2301
The 2301 is mounted onto a standard antenna mount. To complete this installation, you’ll also need
a standard antenna mount, mounting extension, and mounting adapter.
Figure 8: Mounting the 2301 on an antenna mount
1
2
3
4
5
6
7
1. Antenna mount
2. Mounting extension
3. Hole in mounting extension
4. Mounting adapter
5. Base of 2301
6. 2301 connector
7. Top of 2301 (antenna)
To install the 2301:
1. Install a 1” x 14 UNF thread
antenna mount in the desired
location.
2. Screw a
mounting
extension onto
the antenna
mount.
3. Feed the 2301
cable through
the hole in the
mounting
extension,
bringing cable
up through the
hollow core of
the extension
and out the
top.
4. Screw a
mounting
adapter onto
the extension,
bringing cable
up through
hollow core of
the adapter
and out the
top.
5. Screw the
2301’s bottom
half (base) onto
mounting
adapter.
6. Plug the cable’s
connector into
connector on
the 2301’s
5