NorthStar 491 Operation Manual Download

Page: 46 / 76

Page

491 Echo Sounder Operations Manual

Using the MORE key

Pressing the

MORE

key accesses the following functions:

•

alarms (described in Chapter 7)

•

advance speed

•

A-scope

•

data (numeric and graphic information on the

ECHO

screen)

•

snapshots (961/962 only)

•

video overlay setup (957/958 only)

When the menu function is in use in the 961/962, the

ECHO

screen moves every half second, giving the picture a less than
smooth appearance. Press

RETURN

to go back to the main

screen for a normal smooth appearance.

Changing the advance speed

Advance speed

refers to the speed at which the vertical scan

lines move from right to left across the

ECHO

screen. There

are five advance speeds (plus the

STOP

setting, which freezes

the advance of all data):

•

2/1

- two identical lines of data are displayed for every

ping

•

1/1

- one line of data is displayed for every ping

•

1/2

- one line of data is displayed for every two pings

•

1/4

- one line of data is displayed for every four pings

•

1/8

- one line of data is displayed for every eight pings

For speeds 1/2, 1/4, and 1/8, each displayed line of data is

averaged

over 2, 4, or 8 pings.

To set the advance speed:

1. At the

ECHO

screen, press

MORE

, then press

ADVANCE

SPD

2. At the

SET ADVANCE SPEED

window, keep pressing the

ADVANCE SPD

key to select the desired advance speed.

3. Press

RETURN

to go back to the

ECHO

screen.

Summary of Contents for 491













































































Search results

Summary of Contents for 491

Reviews:

Related manuals for 491

Brands by name

Popular brands

NorthStar 491, Operation Manual

Search results

Summary of Contents for 491

Reviews:

Related manuals for 491

Brands by name

Popular brands