NorthStar 4 KW RADAR, Installation Manual

Page: 23 / 52

Northstar 4 kW Radar Installation Manual
19
4 kW interconnection cable (NS00310X) connector ends
Pin Color AWG size B C D E
1 Blue (big) #16 1
2 Purple (big) #16 1
3 Red (big) #16 2
4 Yellow (big) #16 2
5 Drain wire (Coax line) #24 2
6 No connection
7 No connection
8 No connection
9 Yellow (thin) #24 twist pair 3
10 Clear Coax line #24 1
11 No connection
12 Green (thin) #24 5
13 White (thin) #24 twist pair 4
14 Drain wire #24 2
15 Shield line #24 1
16 Orange (medium) #18 3
Shell Braid shield X
4.3 Run the 4 kW interconnection cable (NS003102/NS003103) to the
radar processor
Run the 4 kW interconnection cable (NS003102 or NA003103) from the scanner to the radar processor.
Push the round connector (A) of the 4 kW interconnection cable into the scanner connection on the
radar processor and tighten the locking nut.
The interconnection cable pin details are provided here for information, in case the connector needs
to be removed to feed the cable, or in case the cable needs to be shortened.