manualshive.com logo in svg

NorthStar 160 SC -, Manual

Share
Download
NorthStar 160 SC - Manual Download Page 8

NORTHSTAR MANUAL 

 

5

 

Max.        =  

Maximum number of persons recommended  

 

Max.      +         +         =

 Maximum loading weight

  

Maximum recommended load includes the weight of all persons onboard, 
all provisions and personal effects, any equipment not included in the light 
craft mass, cargo (if any) and all consumable liquids (water, fuel, etc. )  

 

 

Do not exceed the maximum number of persons. Regardless of the 
number of persons on board, the total weight of persons and equipment 
must never exceed the maximum recommended load. Always use the 
seats/seating spaces provided. 

 

 

When loading the craft, never exceed the maximum recommended load. 
Always load the craft carefully and distribute loads appropriately to 
maintain design trim (approximately level). Avoid placing heavy weights 
high up.

 

 

              

CE-marking, as a proof that the boat was built according to the 

requirements of the Directive for Recreational Crafts 94/25/EC as 
amended by Directive 2003/44/EC. 

  

 

2.2. TECHNICAL DATA 

Length Overall 

: 4.81 m. 

Length Waterline 

: 3.95 m. 

Beam 

: 1.92 m. 

Draught 

: 0.30 m. 

Freeboard 

: 0.71 m. 

Weight without Engine 

: 460 kg. 

Max. Loading Weight (*) 

: 550 kg. 

Max. Number Of Person (*) 

: 5  

Max. Power 

: 45 kW (60 HP) 

Shaft Length 

: L 

Design Category 

: C 

Battery  

: 12V - See your engine’s manual for 

recommendation 

Fuel tank capacity 

: Portable tank per engine brand 

Water tank capacity 

: N/A 

Holding Tank Capacity 

: N/A 

Strong points 

: 3 U bolts provided – one at the bow 

and two at the stern 

Electric bilge pump capacity  

: 31.5 l/min. 

 

(*) Recommended values 

Summary of Contents for 160 SC -

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands