25
Moving and Handling Instructions
1. Maneuvering Your Water Heater
1. Lift handles with both hands until the wheels come
in contact with the ground and the frame is lifted off
of the ground.
2. Push the water heater forward if it is being moved
on solid, smooth ground. (concrete, hard-packed
dirt)
3. Pull the water heater backward if it is being moved
on rough, uneven ground. (grass, gravel)
2. Lifting Your Water Heater
1.To reduce risk of injury, it is recommended to use a
hoist to lift this water heater.
2. Lift from four lifting points.
3.If the water heater is to be moved a short distance,
the hoist can be positioned on the front lifting points,
and the back lifting points can be hand lifted.
Maintenance Instructions
Winter Storage:
Items needed: 12” piece of garden hose or equivalent,
funnel and RV antifreeze (approximately 2 gallons).
1. Attach the water heater’s inlet hose to the high
pressure outlet of your pressure washer.
2. Attach the garden hose with funnel to your pressure
washer’s pump inlet (see illustration).
3. Pour RV antifreeze into the funnel.
4. Turn your pressure washer on.
Do not
turn on the
water heater.
5. Let your pressure washer run until antifreeze comes
out of the high pressure outlet of the water heater.
6. It will take about 1.5 gallons of antifreeze to fill your
pump and the heating coil.
7. Disconnect the water heater’s inlet hose from the
pressure washer and reconnect it to the outlet of the
water heater.
8. The water heater is now prepared for long term
storage.
Front Lifting Points
Back Lifting Points
RV
Antifreeze
Water
Inlet
Hose
Funne
l
Summary of Contents for 157495
Page 27: ...27 Parts Explosion 157495 Rev U ...
Page 29: ...29 Wiring Diagrams ...
Page 30: ...30 ...
