NORTHROP GRUMMAN Park Air T6-AV100, User Documentation

Page: 23 / 55

T6-D-USER-AV100-EN Page 2-5 Description
© Park Air Systems Limited 2020
2.3 Antenna configurations
2.3.1 Standalone radio configuration
Single transmit or transmit/receive antenna:
Transmit and receive antennas:
Dangerous voltage
You must be careful of high RF voltages on the ANTENNA connector on the rear of the radio and
amplifier. This is indicated by the RF voltage warning symbol ( ).
RF switch control signal
Only enable the RF switch control setting on a radio that is connected directly to either another
Park Air T6 Radio’s internal relay or a Park Air Z4 Solid State Changeover Relay when DC control is
required. The DC signal used for switching these relays can cause other equipment to not function
correctly and reduce system performance.
Transmit/receive
antenna
Connect to RADIO A or RADIO B
Transmit
antenna or
Transmit
antenna
Connect to RADIO A or RADIO B
Receive
antenna