Read this manual carefully before use
and keep it safe for future reference.
Warnings
-
Avoid eye injury. Do not stare directly into the light beam or point it directly into the eyes of
any person or animal. Doing so for more than a few seconds could cause retinal damage.
-
When powering on the flashlight, make sure to point it down or away from you and anyone else.
-
The surface of this product can become hot after prolonged use. Be careful when touching it and
make sure to keep it away from anything flammable or combustible.
-
Never leave the flashlight unattended when it is powered on.
-
If the flashlight is used less than once a month, remove the batteries to avoid leakage or corrosion.
-
Before long-term storage, remove the batteries and store them in a cool and dry place.
-
Any battery may leak harmful chemicals. To avoid risk of injury, do not let any material leaked from a
battery come in contact with eyes or skin.
-
Do not expose batteries to excessive heat or direct sunlight. The battery may rupture or explode if put
in a fire or exposed to excessive heat.
-
Only use the included battery.
-
Install the batteries in the proper orientation as indicated by the instructions in this manual.
-
This product is water resistant, not waterproof. Don’t leave it outside in heavy rain.
-
If soaked in water, immediately dry the flashlight and remove the battery. Dry thoroughly and install a
new battery.
-
Do not attempt to disassemble or repair this product. It is dangerous and will also void the warranty.
-
Keep this product away from children. Do not leave children unattended near this product.
-
Make sure that this product is intact and that there are no missing parts.
-
To avoid damage to this product, be careful not to overtighten or improperly fix any of the threaded
fittings.
First time use
-
Unscrew the end cap in a counter-clockwise direction.
-
Remove the battery protection plate placed between the battery negative pole (-) and end cap.
-
Insert the battery again with the positive pole (+) pointing toward the light head. Refit the end cap.
-
Remove the protection film from the glass front.
-
Open the rubber protection on the end cap to access the USB connectors.
-
Fully charge the battery before first time use.
-
Trace has three light modes. High, medium and low. To change he brightness simply push the on/off
switch the number of times needed.
Charging the battery
-
To charge the battery use the included USB cable. Plug the USB-C cable (male) into the flashlight and
connect the USB-A (male) to a computer or a universal USB adaptor.
-
While charging a red indicator light near the charging port will blink until fully charged. The red
indicator light will be permanently lit when fully charged.
- To
fully charge an empty battery takes approximately 5 hours.
-
Always close the rubber protection on the tail cap properly after charging.
Power bank
-
The flashlight may be used as a power bank.
-
Use your own charging cable or the included USB cable. Plug the USB-A cable (male) into the
flashlight and the other end to your device.
-
When the flashlight is used as a power bank the blue indicator light will be permanently lit.
Cleaning instructions
-
Wipe spills and stains immediately.
-
Clean using a soft, dry cotton cloth.
-
If a deeper clean is required, a cotton cloth moistened with lukewarm water can be used.
Always wipe with a dry cotton cloth to remove any residue.
-
Avoid applying strong cleaning agents as it may damage the surface.
Trace
4 W LED, 4400 K, IP44, 100 lm / 240 lm /
360 lm step dimmable, Power bank,
3.7V Lithium Ion rechargable battery
