14
▌▌
Pattern
Function
Pattern Function is that a camera memorizes the path (mostly curve path)
by joystick of controller for assigned time and revives the path exactly as it
memorized.
4 Patterns are available and Maximum 150~180S or 500 communication commands
can be stored in a pattern.
Setup Pattern <DOME CAMERA SETUP>
→
<PATTERN SETUP>
→
<EDIT PATTERN>
□ Pattern editing screen is displayed as below.
□ Movement by Joystick and preset movement can be memorized in a pattern.
□ The recording time will be shown on the right-down corner
(Max 150~180S or 500 commands)
Pattern Scan also can be set as preset, swing and group included. ex. if user needs pattern to run
preset 1, swing 8 and group 5 in Pattern Scan 1, then the command will be as following,
call+1+enter
→
call+148+enter
→
call+155+enter and save. To execute the pattern 1 scan
(call+131+entern) the scanning will move as setting.
Run Pattern
Ex) Run Pattern 1: <Call>[131]<Enter>
Ex) Run Pattern 2: <Call>[132]<Enter>
Delete Pattern Use OSD menu to delete Pattern
<DOME CAMERA SETUP>
→
<PATTERN SETUP>
→
<CLR PATTERN>
