2
3. Regulations & Maintenance
FCC compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generation, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on an electrical circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Precautions
＊
Read all of these instructions and save them for later use.
＊
Follow all warnings and instructions on the product.
＊
Product
-
Do not cover or block the vent holes in the case.
-
Do not insert sharp objects or spill liquid into the LED monitor through cabinet
slots. They may cause accidental fire, electric shock or failure.
-
Disconnect the power plug from the AC outlet if you will not use it for an
indefinite period of time.
-
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage potentials or other risks.
-
Do not touch the screen directly with your fingers. You may damage the screen,
and oil from your skin is difficult to move.
-
Do not apply pressure to the screen. The LED is very delicate.
＊
Power
-
Use the type of power indicated on the marking label.
＊
Plugs
-
Do not remove any of the prongs of the monitor’s three-pronged power plug.
-
Disconnect the power plug from the AC outlet under following conditions:
◎
If you will not use it for an indefinite period time.
Summary of Contents for LED17ST
Page 1: ......
