IPPTZ30XIR
·
Quick Start Guide
10
6.
Remove the protective film on the IR light.
2
Setting the Dome over the LAN
You shall acknowledge that the use of the product with Internet access might be under
network security risks. For avoidance of any network attacks and information leakage, please
strengthen your own protection. If the product does not work properly, please contact with
your dealer or the nearest service center.
To ensure the network security of the speed dome, we recommend you to have the speed
dome assessed and maintained termly. You can contact us if you need such service.
2.1
Wiring
To view and configure the speed dome via LAN (Local Area Network), you need to connect the
network speed dome in the same subnet with your PC. Then, install the SADP or client software to
search and change the IP of network speed dome.
The following figure shows the cable connection of network speed dome.
Network
Speed Dome
Switch
Internet
NVR
PC
Figure 2-1
Wiring over LAN
2.2
Activating the Speed Dome
Purpose:
You are required to activate the speed dome first by setting a strong password for it before you can
use the speed dome.
Activation via Web Browser, Activation via SADP, and Activation via client software are supported. In
the following sections, activation via web browser and SADP will be taken as examples. You may
refer to the user manual of the speed dome for the details of activation via client software.
2.2.1
Activation via Web Browser
Steps:
1.
Power on the speed dome, and connect the speed dome to the network.
Summary of Contents for IPPTZ30XIR
Page 1: ......
