Network Dome Camera
·
Quick Start Guide
26
26
2.
Crimp an RJ-45 network plug
③
onto the end of the cable,
taking care to insert the twisted pairs of wires in correct order.
3.
Place the O-type gasket
②
onto the end of the camera’s
network interface socket
①
.
4.
Insert the network plug
③
into the camera’s network interface
socket
①
.
5.
Insert the water-proof rubber gasket
⑤
into the waterproof
endcap
④
, and secure lock nut
⑥
with the water-proof
endcap
④
.
6.
Align the snap on the water-proof endcap
④
with the notch on
the camera’s network interface socket
①,
and then secure the
water-proof endcap
④
to the camera’s network interface
socket
①
to finish installation.
