![background image](http://html.mh-extra.com/html/northern/ip4t/ip4t_installation-and-quick-start-manual_1708261006.webp)
Network Turret Camera
·
Quick Start Guide
5
5
●
Proper configuration of all passwords and other security
settings is the responsibility of the installer and/or end-user.
Cautions
●
Make sure the power supply voltage is correct before using the
camera.
●
Do not drop the camera or subject it to physical shock.
●
Do not touch sensor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
●
Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfunction), and affect the endurance of sensor at the same
time.
●
The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.
●
Do not place the camera in extremely hot, cold (the operating
temperature shall be -30°C ~+60°C), dusty or damp locations,
and do not expose it to high electromagnetic radiation.
●
To avoid heat accumulation, good ventilation is required for
operating environment.
●
Do not expose internal components to liquid or moisture.
Summary of Contents for IP4T
Page 1: ......