Northern IP4D, Installation & Quick Start Manual

Page: 25 / 35

Network Bullet Camera
·
Quick Start Guide
24
24
1. Feed the plugless network cable ⑦ through the lock nut ⑥ ,
waterproof rubber gasket ⑤ (rubber gasket inset ridge must
face waterproof endcap), and the water-proof endcap ④ in
order.
2. Crimp an RJ-45 network plug ③ onto the end of the cable,
taking care to insert the twisted pairs of wires in correct order.
3. Place the O-type gasket ② onto the end of the camera’s
network interface socket ① .
4. Insert the network plug ③ into the camera’s network interface
socket ① .
5. Insert the water-proof rubber gasket ⑤ into the waterproof
endcap ④ , and secure lock nut ⑥ with the water-proof
endcap ④ .
6. Align the snap on the water-proof endcap ④ with the notch on
the camera’s network interface socket ①, and then secure the
water-proof endcap ④ to the camera’s network interface
socket ① to finish installation.