1 OF 5
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For future reference, please complete the
owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment cannot be responsible for issues arising from
modification. We strongly recommend this machine is not modified and/or used for any application other than that for which it was
designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Northern
Tool + Equipment to determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE
Reliable sharpener handles high speed drill bits, knives, scissors, chisels and planes. Can sharpen straight edge chisels and plane
blades.
TECHNICAL SPECIFICATIONS
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible
conditions or situations that could occur.
It must be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
·
Keep work area clean,
free of clutter and well lit. Cluttered and dark work areas can cause accidents.
·
Do not use your sharpener where there is a risk of causing a fire or an explosion;
e.g. in the presence of flammable liquids, gasses,
or dust. Power tools create sparks, which may ignite the dust or fumes.
·
Keep children and bystanders
away while operating the sharpener. Distractions can cause you to lose control, so visitors should
remain at a safe distance from the work area.
·
Be alert of your surroundings.
Using the sharpener in confined work areas may put you dangerously close to cutting tools and rotating
Parts.
ELECTRICAL SAFETY
·
WARNING!
Always check to ensure the power supply corresponds to the voltage on the rating plate.
·
Do not abuse the cord.
Never carry your sharpener by its power cord, or yank tool or extension cords from the receptacle. Keep power
and extension cords away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords may cause
a fire and increase the risk of electric shock.
·
Grounded tools
must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never
remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in
doubt as to whether the outlet is properly grounded.
·
Double insulated tools
are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still doesn't fit, contact a qualified electrician to install a polarized
outlet. Do not change the plug in any way.
·
Avoid body contact
with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increase risk of electric
shock if your body is grounded.
·
When operating a power tool outside,
use an outdoor extension cord marked "W-A" or "W." These cords are rated for outdoor use
and reduce the risk of electric shock.
·
Extension Cord Use.
A. Use only 'Listed' extension cords. If used outdoors, they must be marked "For Outdoor Use." Those cords having 3-prong grounding
type plugs and mating receptacles are to be used with grounded tools.
B. Replace damaged or worn cords immediately.
C. Check the name plate rating of your tool. Use of improper size or gauge of extension cord may cause unsafe or inefficient operation of
your tool. Be sure your extension cord is rated to allow sufficient current flow to the motor. For the proper wire gauge for your tool, see
chart.
CHART FOR MINIMUM WIRE SIZE OF EXTENSION CORD:
Item
Motor
RPM
Wheel Dia.
Max. Drill Dia.
Min. Drill Dia.
Description
120V, 60Hz, 70 Watts
4800
2" (51mm)
3/8" (10mm)
7/64" (3mm)
(NOT RECOMMENDED)
Nameplate AMPS
Cord Length
0-6
6-10
10-12
12-16
25'
50'
100'
150'
18 AWG
18 AWG
16 AWG
14 AWG
16 AWG
16 AWG
16 AWG
12 AWG
16 AWG
14 AWG
14 AWG
14 AWG
12 AWG
12 AWG
Summary of Contents for 337007
Page 1: ......
Page 5: ...DIAGRAM 4 OF 5...
