Page 18 of 30
a)
Move the throttle lever to the SLOW position.
b)
Turn the engine switch to the OFF position.
c)
Turn the water supply OFF.
d)
Actuate the spray gun trigger to relieve system pressure.
e)
Remove the garden hose.
f)
Remove the pressure hose.
g)
Cool the engine at least five minutes before storing; a hot engine is a fire hazard.
After Each Use
When you are finished using the pressure washer, you must prepare the sprayer for storage and store
it in a proper location.
1. Make sure the engine start switch is OFF.
2. Disconnect the engine spark plug wire if you haven't already done so.
3. Disconnect the high-pressure hose, garden hose, and spray gun.
4. Let the engine cool for 5 minutes before moving the pressure washer to its storage location.