Prior to assembly, inspect all components for damage. Report any damage to the shipping company. Check the packing list in the back of this manual
to be sure all parts are included.
Select a mounting location in accordance with the guidelines in the IM1000 Installation Manual. The generator set must typically be mounted on a
rigid, flat surface above a strong structure, such as the vessel’s stringers, to minimize vibration transference to the hull.
Note that the generator set is designed for single side service. When viewed from the rear, the right hand side is the service side and should be
exposed for easy maintenance access.
Install the generator set in the vessel as near to a level attitude as possible. Ensure that the enclosure’s right hand side and rear are at the
recommended distances (6 inch recommended, 4 inch minimum.) from the vessel’s bulkheads.
Note: The Generator set may still possess original factory lifting points. These lifting points will need to be loosened and rotated down, below the highest
point of the engine. Be sure to tighten these bolts before installing generator set.
AVOID POSITIONING THE ENCLOSURE INTO CORNERS WITH OVERHEAD BLOCKED TO REDUCE CHANCE OF INTAKE/EXHAUST AIR
RECIRCULATION OUTSIDE THE SHIELD.
2
Summary of Contents for GEM M864W3
Page 17: ......
