Page 7 of 9
2) To install the hose:
a. Route the hose through the guide arm rollers and opening of the spool. Apply thread tape or
sealant to hose threads.
b. Screw hose fitting into threaded fitting on swivel. Tighten connection with a wrench on fitting.
Install hose bumper on working end of hose if required.
c. Disengage latch pawl and allow hose to retract.
Replacing the swivel
1) If the swivel leaks, replace the seal (9) and washer (8) by removing the lock washer (1) and the
part of the swivel shift.
2) If the ball bearings (5) wear out, replace the bearings by removing the lock washer (2).
3) Replace the new seal by clipping the lock washer (1). Replace the part of the swivel shift by
clipping the lock washer (2).
