Ideal for cutting foam nylon rope or other craft materials.
WARNING
! Always check to ensure the power supply corresponds to
the voltage on the rating plate.
• Do not abuse the cord. Never carry a portable tool by its power cord,
or yank tool or extension cords from the receptacle. Keep powerand
extension cords away from heat, oil, sharp edges or moving parts. Replace
damaged cords immediately. Damaged cords may cause a fire and increase
the risk of electric shock.
• Grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. Never remove the grounding
prong or modify the plug in any way. Do not use any adapter plugs. Check
with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded.
• Double insulated tools are equipped with a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
doesn't fit, contact a qualified electrician to install a polarized outlet.
Do not change the plug in any way.
Intended Use:
Electrical Safety:
Technical Specification:
Description
Specifications
Voltage:
120V
Frequeney:
60Hz
Input power:
130 Watts
Blade length:
5 7/16 in.
Max. temperature:
842°F (450°C)
General Safety Rules:
WARNING!
Read and understand all instructions.
Failure to follow all
instructions listed below may result in electric shock, fire and/or serious injury.
WARNING!
The warnings, cautions, and instructions discussed in
this instruction manual cannot cover all possible conditions or
situations that could occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Thank you very much for choosing a Northern Industrial product!
For future reference, please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read
the entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot
be responsible for issues arising from modification. We strongly recommend
this machine is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application,
DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep work area clean,
free of clutter and well lit. Cluttered and dark work
areas can cause accidents.
• Do not use your tool where there is a risk of causing a fire or an explosion;
e.g. in the presence of flammable liquids, gasses, or dust. Power tools create
sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a Hot Knife.
Distractions can cause you to lose control, so visitors should remain at a
safe distance from the work area.
• Be aware of all power lines,
electrical circuits, water pipes and other
mechanical hazards in your work area, particularly those hazards below the
work surface hidden from the operator's view that may be unintentionally
contacted and may cause personal harm or property damage.
• Be alert of your surroundings.
Using power tools in confined work areas
may put you dangerously close to cutting tools and rotating parts.
1
2