Northern Fridge TruckFridge TF130, Manual, Page: 11 / 47

TruckFridge Built-in User Manual
Updated 5 July 2020 Page 11
Align large black mounting plate with existing
holes already in cabinet platform. They can be
located from bottom, if shelf is covered with
carpet, poke up through holes and through the
carpet. (Carpet removed in picture for
demonstration purpose only.)
Bolt mounting plate to bottom of cabinet with
finger tabs along the back of the cabinet, pointed
up and toward center of truck. Check to be sure
fridge thermostat is turned off in case unit has
been tilted during installation. Connect the fridge
power plug to the truck power cord plug.
If your cabinet does not have a top mount
bracket, use small black TF top bracket with black
push clips and secure to bracket in the top of
cabinet. This will bolt to TF top fridge bracket. If
your truck already has top mounting bracket as
shown here, the TF top bracket and push clips will
not be needed.
Slide fridge on to mounting plate, aligning rear
finger tabs to fridge bottom plate. Insure wires
are not pinched or rubbing. Align front holes and
secure with included bolts and lock nuts.
Install cabinet trim frame using plastic “trees” as
mentioned previously. Fridge light will be on
when door is open even when thermostat is in “0”
Off position. Do not turn fridge on until it has
remained in upright position at least 4 hours prior
to being installed.