Write to: East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK
Visit our website : www.ndiver.com, telephone: +44 (0) 1257 25 44 44 or email: [email protected]
V.01.02102018
CHARGER INSTRUCTIONS
Please follow the points below to sucessfully charge the battery for the Travel torch.
1.0A
0.5A
( + )
( - )
+
-
+
-
Battery charge time is 4 hours at 1A and 8 hours at 0.5A. When the battery has finished charging, disconnect the
charger from the power source (switching off the power source if necessary), and remove the battery from the charger. It
is normal for the battery/charger to become warm when charging.
Insert the smaller end of the USB cable into the
corresponding port on the charger.
1
2
3
4
5
6
Ensure you insert the battery into the charger the correct
way, i.e. with the battery’s poles (- and +) touching the
corresponding terminals. The correct battery position is
labelled on the charger.
“NC” displayed on the charger’s screen denotes that
there is no battery inserted or the battery is not charging.
The screen may display “NC” for a moment when the
battery is inserted. It will then charge normally.
If the screen continues to display “NC”, check the
battery is inserted correctly.
The charger will display the battery’s current voltage and
overall charging progress. “100%” displayed on the
screen denotes that charging is complete.
The button above the screen allows you to toggle
between a 0.5A current and a 1A current. the 1A current
is twice as quick to charge as 0.5A, but the 0.5A current
will charge the battery more efficiently and slightly
prolong the length of time to the next charge.
