WWW.NDIVER.COM
¦
+44 (0) 1257 25 44 44
¦
EXPLANATION OF MARKING CODES USED TO DEFINE LEVEL OF PROTECTION PROVIDED
EN ISO 20347:2012 OB – Occupational Basic, WARNING: offers NO protection to the toes against mechanical risk
Additional foot protection may be provided and the following marking codes identify the protection offered
Protection offered
Marking
Protection offered
Marking
Perforation resistant sole
P
Water penetration and absorption
WRU
Energy absorption of the seat region
E
Resistance to hot contact
HRO
Antistatic
A
Cut resistance
CR
Cold insulation of the sole complex
CI
Slip resistance on ceramic tile floor with Sodium laurel sulphate lubricant
SRA
Resistance to fuel oil
FO
Slip resistance on steel floor with glycerol lubricant
SRB
Water resistance
WR
Slip resistance, both SRA and SRB have been met
SRC
Heat insulation of the sole complex
HI
PENETRATION RESISTANT FOOTWEAR
The penetration resistance of this footwear has been measured in the laboratory using a truncated nail of diameter 4,5 mm and a force of
1100N. Higher forces or nails of smaller diameter will increase the risk of penetration occurring. In such circumstances alternative
preventative measures should be considered
Two generic types of penetration resistant insert are currently available in PPE footwear. These are metal types and those from non-
metal materials. Both types meet the minimum requirements for penetration resistance of the standard marked on this footwear but each
has different additional advantages or disadvantages including the following:
Metal
: Is less affected by the shape of the sharp object / hazard (ie diameter, geometry, sharpness) but due to shoemaking limitations
does not cover the entire lower area of the shoe
Non-metal
– May be lighter, more flexible and provide greater coverage area when compared with metal but the penetration resistance
may vary more depending on the shape of the sharp object / hazard (ie diameter, geometry, sharpness)
For more information about the type of penetration resistant insert provided in your footwear please contact the manufacturer or
supplier detailed on these instructions
Declarations of conformity:
EC Declaration of conformity
Northern Diver (International) Ltd.
East Quarry, Appley by Lane North,
Appley Bridge, Wigan, Lancashire. WN6 9AE
Declare that the PPE named ROCKSWIM NON-SAFETY
is in conformity with the provisions of Regulation (EU) 2016/425 and with requirements for PPE category II is identical to PPE which
is subject to EC type examination certificate No. LECFI00366971
EN ISO 20347:2012 OB E FO SRA
by ITS Testing Services UK Ltd. Centre Court, Meridian Business Park, Leicester, LE19 1WD, United Kingdom. Notified
body number 0362 and transferred to
INTERTEK Italia S.p.A
.
Via Guido Miglioli 2/A 20063 Cernusco sul Naviglio – Milano
(European Notified body No. 2575)
Signed:
Date: 20/11/2020
Lloyd Preston,
Technical manager
TRIPAL Group Ltd
For and on behalf of Northern Diver (International) Ltd
