Contact Northern Diver
| +44 (0) 1257 25 44 44 | [email protected] | www.ndiver-commercial.com
5
Cam Band Instruction
Pass the end through the end slot from
back to front
Rotate the cam closed. It should require
a fair amount of force, but do not over-
tension. Ask a dive professional if you
are not sure of the correct tightness.
Aggressive jerking on the harness can
test for secure assembly. Do not get
body parts caught in the cam, it can
cause serious injury. Secure the end of
the webbing with Velcro or lace through
a keeper.
Important Note!
Before Use
Please ensure that a visual inspection is performed on the R-Vest before each
dive. The operator should check the webbing, thread and d-rings to make sure
they show no signs of damage. The studs on the weight pockets should also be
checked to make sure they are closed correctly. The rods which hold the weight
pockets should also be inserted correctly and the Velcro tab closed. Please ensure
that the cylinder is securely fastened.
After Use
Rinse the R-Vest in fresh warm water making sure that any dirt / salt is removed
and leave to dry. When dry the R-Vest studs on the weight pockets should be
lubricated with silicone grease or spray.
Summary of Contents for R-Vest
Page 1: ...RECOVERY VEST MANUAL ...
