SM48 Rev. 4.00
AA86/87 Stereo Intercom Manual
Nov 12, 2003
Page 2-1
ENG-FORM: 805-0104.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Section 2.0 Installation
2.1
Introduction
Information in this section consists of: unpacking and inspection procedures, installation
procedures, post-installation checks, and installation drawings.
Important Note:
The AA86/87 with NAT faceplates IS NOT
mechanically interchangeable with the previous
QuietFlite version. Mounting holes must be relocated
for retrofit, and installation procedure changes noted.
2.2
Unpacking and Inspection
Unpack the equipment carefully and locate the warranty card. Inspect the unit visually
for damage due to shipping and report all such claims immediately to the carrier
involved. Note that each unit should have the following:
- AA86/87 Stereo Intercom
- Warranty Card
- Release certification
- Installation Kit
- Operator’s Manual
Verify that all items are present before proceeding and report any shortage immediately
to your supplier.
Complete the warranty card information and send it to NAT when the installation is
complete. If you fail to complete the warranty card, the warranty will be activated on
date of shipment from NAT.
2.2.1
Installation Kit Components.
The contents of the NAT AA86/87 Installation Kit are itemised below:
Quantity
Description
NAT Part #
1
Faceplate, Reversible Horiz./Vert.
50-04-041
2
Knob, Fluted Concentric, Rubber
40-21-041
1
Hoods, D-sub, Plastic
20-29-026
1
Connector, D-sub, Socket, solder
20-20-026
2
Locking Hardware, D-sub, Latch Plate
20-27-026
3
Screw, Panhead, Phillips, Brass, Black
25-11-427
1
Label, Drill Template, AA86/87
43-10-086
