8
Assembly Instructions
1.) Handle Assembly.
-
Use (1) 5/16” x 3/4” bolt, (1) 5/16” x 2” bolt, & (2) 5/16” nuts to fasten the handle to the
frame.
- Make sure the tab engages the slot.
-
Install the 3/8” x 3 1/4” bolt and 3/8” nut.
-
Loop the zip tie around the 3/8” bolt under the handle to loosely capture the control cable,
make a loop approximately 1” diameter, trim off the excess zip tie.
Caution
: Tightening zip
tie can result in abnormal ware to control cable jacket, assure control cable jacket does not
contact frame.
Fig01707
5/16” x 3/4” bolt
5/16” x 2” bolt
3/8” x 3 1/4” bolt
Handle
5/16” nut
5/16” nut
3/8” nut
Frame
slot/tab
Control cable
Zip tie
3/8” bolt
