Operation
25
If using water tank:
Follow these instructions when supplying water from the feed tank:
1.
Ensure that you have the tank feed ball valve OPEN, and the city tap water
ball valve CLOSED, as indicated in the diagram below.
2.
Make sure the water in your tank is clean. Debris can cause excess pump
wear and reduce performance.
Attach high
pressure hose
Attach the high pressure hose to the pressure washer's water outlet.
WARNING
:
NEVER operate this pump with components (such as hose, connections,
and spray gun) rated for lower pressure and/or temperature limits than the
machine's maximum rated pressure and temperature, or component could
rupture and cause serious personal injury from escaping high pressure
fluids.
1.
See "Machine Component Identification" section of this manual for location
of the pressure washer's water outlet.
2.
Your pressure washer hose is equipped with quick couplers. Simply pull the
collar back and push the coupler onto the water outlet nipple. (Figure 8a).
The collar should slide over the ball bearings.
Figure 8a
Collar
Coupler
High Pressure Output
Open this
ball valve
Close this ball valve
