10
Maintenance Instructions
*Refer to the Honda Engine Owner’s Manual
for Engine Maintenance Instructions
Maintenance Mode
Before performing any maintenance on the pressure
washer, it must be placed in maintenance mode.
A.) Turn off engine
B.) Turn off water supply
C.) Bleed water from system
D.) Shut off fuel valve
E.) Unplug spark plug wire from spark plug
Maintenance Schedule
What to Check
When To Check
What to Do
Inlet Filter
Each Use
Clean
Tires
Each Use
Check Pressure
Hoses
Each Use
Check for Wear
Bolts
Each Use
Check for Loose
Bolts
Cleaning The Inlet Filter
WARNING: Check whether dangerous
chemicals have been used, and take
precautions when handling filters.
157205
157207
A.) Unscrew inlet filter cap
B.) Remove Inlet filter mesh
C,) Run water though to clean mesh
Checking the Tire Air Pressure
A.) Remove air fill cap
B.) Check tire sidewall for correct pressure.
C.) Replace air fill cap
Checking the Hoses
WARNING: Do not use a finger or skin to check for
leaks. Escaping fluid under pressure has sufficient
force to penetrate the skin, causing serious injury.
Do not operate the pressure washer if the hose is
cracked, worn, or leaking.
A.) Check all hoses for leaks
B.) Check all hoses of worn areas
Air Fill Cap
Good
Air Fill Stem
00425
Air Fill Cap
Filter Mesh
Good
Water
Bad
Wire Mesh
Bad
Summary of Contents for M157206S
Page 5: ...5 Hardware Bag...
Page 16: ...16 This page has intentionally been left blank...
