Assembly Instructions
43
Step 17
Remove the Plug on the outside of the
Control Valve
Thread the Large Swivel Fitting into the
Control Valve
(Tighten the Swivel Fitting finger tight
and orient the fitting down as shown,
then Tighten the Nut on the Swivel
Fitting into Control Valve with a wrench
to 44-54 lb-ft)
Step 18
Raise beam to vertical position as
described in the SPLITTING
OPERATION section of the manual
Slightly loosen Hose Clamp on to the
loose end of the Return line
Slide the loose end of the Return Line
onto the Return Line Fitting
Tighten Hose Clamp
Return Line
Return Line
Fitting
Hose Clamp
Fig 02429
Swivel
Fitting
Hydraulic
Hose
Fig 02428
Step 19
Install loose end of Hydraulic Hose into
the Large Swivel Fitting as shown and
tighten the fitting connection to 47 lb-ft
(No hydraulic sealant required)
Plug Replaced
with the
Lg Swivel Fitting