North Star 165620 Owner'S Manual Download Page 7

 

 

Dear Valued Customer: 
 
The  NorthStar  Product  you  just  purchased  is  built  with  the  finest  material  and  craftsmanship.    Use  this  product  properly  and 
enjoy the benefits from its high performance.  By purchasing a NorthStar product, you show a desire for quality and durability. 

 

Like all mechanical equipment this unit requires a due amount of care.  Treat this unit like the high quality piece of machinery it 
is.  Neglect and improper handling may impair its performance.  Please thoroughly read the instructions and understand the 
operation before using your product. 

 

Limited Warranty 

 

NorthStar shall warranty any

 

piece of equipment manufactured, or parts of equipment manufactured, to be free from defects in 

material  or  workmanship  for  a  period  of  2  years  from  the  date  of  purchase  by  user.  This  warranty  applies  to  the  original 
purchaser  of  the  equipment  and  is  non-transferable.  Verification  of  purchase  is  the  responsibility  of  the  buyer.  Parts  will  be 
replaced or repaired at no charge, except when the equipment has failed due to lack of proper maintenance. Any misuse, abuse, 
alteration or improper installation or operations will void warranty. Determining whether a part is to be replaced or repaired is 
the sole decision of NorthStar. 

 

NOTE: Some services performed by parties other than NorthStar may void warranty. 

 

This warranty covers parts only. It will not provide for replacement of complete products due to defective parts. Components 

not manufactured by NorthStar such as engines are guaranteed by their manufacturer and can be serviced at factory-authorized 

locations near you. Any costs incurred due to replacement or repair of items outside of a NorthStar approved facility is the 

responsibility of the buyer and not covered under warranty. NorthStar can supply you with the service center location in your 

area. 

 

This warranty specifically excludes the following; failure of parts due to damage caused by accident, fire, flood, windstorm, acts 
of God, applications not approved by NorthStar in writing, corrosion caused by chemicals, use of replacement parts which do 
not  conform  to  manufacturer’s  specifications,  and damage  caused by vandalism. Additional  exclusions: loss of running time, 
inconvenience, loss of income, or loss of use, including any implied warranty of merchantability of fitness for a specific use. 

 

Warranty does not cover items subject to normal wear such as tires, receptacles or any part subject to direct physical contact by 
the public. This warranty does not cover any personal injury or damage to surrounding property caused by failure of any part.  

 

This  warranty  is  in  lieu  of any other warranty expressed or implied and NorthStar assumes no other responsibility or liability 
outside that expressed within this warranty. 
 
Please fill in the following information and have it on hand when you call in a warranty claim. 
 
Customer Number: ______________________________________________________________ 

 

Date of Purchase: _______________________________________________________________ 

 

NorthStar Serial Number: _________________________________________________________ 

 

Item Number: __________________________________________________________________ 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 165620









Reviews: