North Star 1572081, Owner'S Manual

Page: 12 / 44

12
Step 2. Assembly
Note: Remove contents from pallet and assembly can
occur at this time.
1. Install wheel onto axle using a 5/32” allen
wrench.
2. Install Nozzles into Nozzle Holder, Install Nozzle
Holder onto Frame and Install Rubber Feet.
3. Install grip onto handle
4. Attach small bumper to handle with ¼” x ¾” self-
tapper.
5. Insert (1) 3/8” x 2-1/2” bolt through (1) flat
washer and through one end of lanyard as
shown below. Attach 3/8” cotterless pin to other
end of lanyard.
6. Install handle to pressure washer using 3/8” x
21/2” bolt, (4) flat washers and (1) 3/8” nyloc nut
until washers press against tube walls. Repeat
to for both sides.
7. Insert cotterless pin through bottom hole of arm
so handle doesn’t fold up while in use.
WARNING: High Pressure Fluid Injection
Hazard
High-pressure fluid discharge from leaks (even pin-
sized) or ruptured components can pierce skin and
inject fluid into the body. Injection injury can result in
blood poisoning and/or severe tissue damage leading
to infection, gangrene, and possibly amputation.

Never use a finger or skin to check for
leaks.

Never operate machine with damaged or
missing hoses/parts.
 Never attempt to repair a high-pressure
hose or component – Always replace it with
a part that is rated at or above the pressure
rating of this machine.