Assembly and Initial Set-Up
10
STEPS FOR ASSEMBLY / INITIAL SET-UP
STEP 1. UNPACKING & DELIVERY INSPECTION
STEP 2. ASSEMBLY
STEP 3. INITIAL PUMP & ENGINE PREPARATION
Each of these steps is discussed below:
STEP 1. UNPACKING & DELIVERY INSPECTION
Find and separate the components identified in Fig157116_3 – Unpacking, delivery, inspection, assembly
and initial set-up and Fig157116_21 – Hardware Bag. Inspect the pressure washer immediately after you
receive delivery for missing parts and damage.
•
If you have missing or damaged components, contact Product Support at 1-800-270-0810.
Fig157116_3
Hardware Bag
Pressure Washer
High Pressure Hose
Qty-1
799880
Lance, 18.5"
W/Viton coupler
Qty-1
791278
Spray Gun
Qty-1
779165
