1
. Volume UP/DOWN; use the +/- Volume button to change the output level of Linestage
2
. Input UP/DOWN; use the +/- Input button to change the input source.
3
. Mute button; use this button to mute (output disconnection) the Linestage output. The
muting state don’t allows any other function (volume or input change). Press newly the
Mute button to restore the normal operation.
4
. Standby button; use this button to toggle the Linestage between the standby and operation state.
If a North Star Design pair of Monoblock Amplifier is connected to Linestage Preamplifier with the
trigger connection (
15
) you can switch on-off the entire system from the Preamplifier Standby
button.
5
Replacing remote control batteries. Unscrew the 3 screws indicated in the figure. Gently pull the
battery holder and insert a fresh set of batteries. Be careful to follow the + and – polarity
indications at the bottom of the battery compartment. Battery: 2 x LR03 / AAA: 1.5Volts.
