5
EN
G
LIS
H
8
Operating instructions
Plug the appliance into an electrical socket.
• Switch the light on by setting the power switch (2) to the
1
position.
• Switch the light off by setting the power switch (2) to the
0
position.
Adjusting the lamp
Never use force when adjusting the lamp, remember to undo the locking screws
before making adjustments and to tighten them again afterwards.
The lamp can be angled to a variety of positions:
• The light fitting or head of the lamp is attached to the arm by a ball-joint (3) which
enables it to swivel right and left.
• The head of the lamp can also be angled up or down by undoing the locking screw (4).
• The articulated arm has three joints which makes
it easy to adjust to the desired position.
3. Screw the clamp and bracket
assembly to a tabletop or similar
(up to 6 cm in thickness).
4. Insert the peg on the end of
the articulated arm into the hole
in the bracket and lock the arm in
place using the star knob bolt (8).
Make sure that the arm of the light
fitting is securely attached to
the bracket.
