6
EN
G
LIS
H
Sensor light sensitivity level [ SENSOR LEVEL ]
• The sensor has a photocell that detects various degrees of light and darkness.
The photocell’s sensitivity level can be adjusted by turning the [ SENSOR LEVEL ]
knob e.g. in the direction of the arrow to increase sensitivity and against the arrow
to reduce sensitivity. Turn the knob in the direction of the arrow to activate
the detector for brighter lighting conditions.
Adjusting the light’s, detector’s and solar cell’s angle
1. Adjust the light and sensor’s angle to
the desired position.
2. Adjust the angle of the solar cell so that it can
utilize as much available sunlight as possible.
Care and maintenance
Clean the wall light using a lightly moistened cloth. Only use mild cleaning agents,
never solvents or corrosive chemicals.
Troubleshooting guide
The wall light doesn’t
come on.
• Make sure the [ OFF-ON-PIR ] switch (7) is in the
ON
or
PIR
position.
• The batteries are flat. Charge the batteries.
• The power cable between the solar cell and wall light is
damaged or is not properly connected to the wall light’s
power socket.
The wall light comes
on randomly.
See the
Placement
section above.
Summary of Contents for JY-0004A-20W-PIR
Page 2: ......
