North Invent Wave PERFORMANCE Series, User Manual, Page: 7 / 10

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
post@northinvent.com www.northinvent.com
7
Displayport
Pin Description Pin Description Pin Description
1 ML_3LN (Lane 3-) 8 GND 15 AUXP (Auxiliary )
2 GND 9 ML_LN1P (Lane 1+) 16 GND
3 ML_L3P (Lane 3+) 10 ML_LN0N (Lane 0-) 17 AUXN (Auxiliary Channel-)
4 ML_L2N (Lane 2-) 11 GND 18 Hot Plug Detect
5 GND 12 ML_LN0P (Lane 0+) 19 POR (Return for Power)
6 ML_L2P (Lane 2+) 13 Config1 (connected to GND) 20 PO (Power 3.3V / 500mA)
7 ML_L1N (Lane 1-) 14 Config2 (connected to GND)
RS232 – DB9 Plug
Pin Description Pin Description Pin Description
1 Not connected 4 Not connected 7 Not connected
2 TxD (Transmit Data) 5 GND 8 Not connected
3 RxD (Receive Data) 6 Not connected 9 Not connected
The Monitor is equipped with a standard 9-pin D-SUB male connector for RS232 remote control. Further information
about this interface and the remote control is to be found in separate document.
RS422 / 485 - DB9 Plug
Pin Description Pin Description Pin Description
1 TxD- (Transmit Data) 4 RxD+ (Receive Data) 7 Not connected
2 TxD+ (Transmit Data) 5 GND 8 Not connected
3 RxD- (Receive Data) 6 Not connected 9 Not connected
The Monitor is equipped with a standard 9-pin D-SUB male connector for RS422/485 remote control. Further information
about this interface and the remote control is to be found in separate document.