background image

5.6 

5.6.1 

For increased washing power, use the rotary nozzle kit as 

follows:

5.6.2 

Turn off the high pressure cleaner.

lance.

5.6.4 

Turn the high pressure cleaner back on.

5.7 

Recommended Cleaning Procedure

5.7.1 

Dissolve dirt by applying detergent with the fan jet to the dry 

surface.

 

On vertical surfaces, work from the bottom upwards.  Leave 

the detergent to act for 1 to 2 minutes, but do not allow to dry 

out.  Apply the high preesure jet, keeping the nozzle at least 10 

in. from the surface, working from the bottom upwards.  Avoid 

allowing the rinsing water to run on the unwashed surfaces.

5.8 

Storage

5.8.1 

Switch off the cleaner.

5.8.2 

Turn off the water supply tap.

5.8.3 

After use, the detergent residues should be removed from the 

tank.

5.8.4 

Discharge residual pressure by pressing the trigger until no 

more water comes out of the adjustable nozzle.

5.8.5 

Engage the gun safety catch.

5.8.6 

Remove the plug from the socket.

5.8.7 

Operate the cleaner with non-corrosive/non-toxic antifreeze 

before storing for the winter.

M

AINTENANCE

from the power supply socket.

6.2 

To ensure good performance, check and clean the suction and 

5.3 

Pull  the  spray  gun  trigger;  push  the  switch 

to 

start the motor.  

5.3.1 

When re-starting the motor, always keep the 

spray gun trigger compressed.

cut-off:  when the trigger is released, the 

dynamic pressure automatically cuts out 

the motor.  When the trigger is compressed 

the pressure drop automatically starting the 

motor and the pressure is restored with a very slight delay.

 

For correct operation of the TSS, once the trigger has been 

released it must not be pressed again for at least 4 – 5 

seconds.  For correct use of the TSS model cleaner, do not 

leave the unit in automatic cut-off status for more than 15 min.

5.4 

Using Detergent

See 5.5 “Proper use of standard accessoreis.”

5.4.2 

Fill the detergent tank to the level indicated 

through the inlet. 

5.4.3 

Select LOW PRESSURE (see instructions); 

the detergent will be sucked up and mixed with 

the water, with the suction rate regulated by the knob provided.  

5.4.4 

Now distribute the detergent drawn in and mixed with water.

5.5 

5.5.1 

The cleaner is equipped with the adjustable nozzle, which 

provides some important functions:

5.5.2 

LOW PRESSURE operation (fur suction and spraying of 

dtergent).

rinsing).

feature).

Summary of Contents for AR610









Reviews: