Operating Instructions and Parts List
AR383
4
www.arnorthamerica.com
Risk of
Electrocution
•
Inspect cord before using - Do
not use if cord is damaged.
•
Keep all electrical connections
dry and off the ground.
•
Do not touch plug with wet
hands.
•
This product is provided with a
ground fault circuit interrupter
built into the power cord plug.
If replacement of the plug
or cord is needed, use only
identical replacement parts.
•
Do not spray electrical
apparatus and wiring.
Risk of Injection
or Sever Injury
•
High pressure. Keep clear
of nozzle. Do not discharge
streams at persons or animals.
•
Never put hand or fingers over
spray tip while operating the
unit.
•
Never try to stop or deflect
leaks with any body part.
•
Always engage the trigger
safety latch in the safe position
when spraying is stopped even
if only for a few moments.
•
Point gun in safe direction.
Unit will start spraying when
trigger is squeezed if ‘on/off’
switch is in “ON” position.
•
Discharge pressure - When ‘on/
off’ switch is in “OFF” position,
pressure may still exist in unit.
To discharge pressure, point
gun in safe direction and
squeeze trigger.
i
MPortant
S
afety
i
nStrUctionS
(
cont
)
Risk of Explosion
•
Do not spray flammable liquids.
•
Never use in areas containing
combustible dust, liquids, or
vapors.
•
High pressure - Gun kicks back -
Hold gun with both hands.
•
Keep hose away from sharp
objects. Bursting hoses may
cause injury. Examine hose
regularly and replace if
damaged. Do not attempt to
mend a damaged hose.
n
ote
•
Use only detergents specifically
formulated for pressure
washers. Always follow
detergent manufacturer’s
label recommendations for
proper use of detergents.
Always protect eyes, skin,
and respiratory system from
detergent.
•
For either indoor or outdoor
use. Store indoors and where
temperature stays above
freezing.
•
Unplug unit when not in use.
•
Pressure washer is not meant
to pump hot water. Do not
connect to hot water supply.
•
Never leave the unit
unattended while it is plugged
in.
•
Always turn water supply “ON”
before turning pressure washer
“ON”. Running pump dry
causes damage.
