Operating Instructions and Parts List
AR142P
7
www.arblueclean.com
4. Attach the high pressure hose
onto the pump water outlet
by turning clockwise and hand
tightening.
5. Connect garden hose as
explained under Garden Hose
Connection Instructions.
6. Plug the power cord into a
grounded 120V outlet.
7. Turn water on.
8. Unlock trigger lock by moving
lock right to left.
9. Depress and hold the trigger
on the gun for one minute to
release pressure and remove
any air trapped in the system.
10. Turn the “ON/OFF” switch to
the “ON” position.
d
irectionS
for
U
Se
Damage to cleaning surfaces occurs
because the impact force of the
water exceeds the durability of the
surface. You can vary the impact
force by controlling the nozzle’s
fan pattern, the nozzle’s angle
to the cleaning surface, and the
nozzle’s distance from the cleaning
surface. Never use a narrow high
impact stream or a turbo nozzle
on a surface that is susceptible to
damage. Avoid spraying windows
with a narrow high impact stream
or turbo nozzle. Doing so may
break the window. The surest way
to avoid damaging surfaces is to
follow these steps.
2. THIS MUST BE DONE EACH
TIME THE UNIT IS PLUGGED IN
AN OUTLET.
1. Insert lance adapter into the
gun and turn clockwise to
positive stop as shown below.
2. Insert detergent bottle
assembly into gun, push down
and turn clockwise to a positive
stop.
3. Be sure that the power switch is
in the “OFF” position.
S
ySteM
c
onnection
h
oW
to
a
Void
d
aMaGinG
S
UrfaceS
Reset
Pump
High Pressure Hose
