background image

RAISING THE RAMP LIFTGATE. When raising the ramp, always use both hands to assist the ramp
to its closed position just like you did while lowering the ramp. Keep hands, fingers, and other items
away from the ramp edge (pinch points) and ramp frame to avoid injury and or damage.

UNSAFE

SAFE

Once loading and unloading is complete,
ALWAYS SECURE LIFTGATE TO THE
CHASSIS BY LATCHING AND
LOCKING THE RAMP HANDLE OR
RAMP LATCHES TO THE FRAME!
NEVER MOVE THE VEHICLE UNTIL
THE RAMP IS SECURE!

WEAR APPROPRIATE WORK CLOTHES AND FOOTWEAR. We suggest wearing appropriate foot
wear that will keep your feet and toes protected while using the ramp. Wearing steel-toed shoes and
non-slip soles are recommended. Open-toed foot wear, like sandals are not recommended. Wearing
protective gloves whenever using the ramp liftgate for loading and unloading is also recommended.

NEVER USE A CELLPHONE WHILE OPERATING THIS RAMP LIFTGATE.

ABOVE ALL, USE GOOD "COMMON SENSE" WHEN OPERATING THIS RAMP LIFTGATE.

RAMP MAINTENANCE

There are two grease fittings
located on either side of the ramp.
To ensure consistent mechanical
operation of the ramp, these fittings
must be greased 1-2 times per
year to keep the interior spring
torsion bar and cams lubricated.

If you have any difficulty with, or questions regarding the use, maintenance or operation of the ramp, we want to help! 
Please call (704) 844-0900.

Comply with all attached instruction and warning labels. Keep instruction and warning labels clean and legible. If labels have become
illegible or missing, have them replaced immediately. Get free replacement labels from North American Ramps LLC.

NO ALTERATIONS

 OF ANY KIND

 SHALL BE MADE TO THE RAMP, 

nor the use of the ramp liftgate for any other purpose outside the

intended specified manufacturers suggested use, as this will void the manufacturer’s warranty and release North American Ramps LLC
from all indemnification and liability for the misuse and neglect of using the ramp for anything other than the manufacturers intended use
for this ramp.

 Only manufacturer attachments or accessories should be used with the ramp, and no other such device should be

installed without contacting the manufacturer first.  At all times, operation and maintenance of the ramp shall be done in accordance with
these warnings and the operation manual.  It is recommended that qualified personnel do an annual inspection of the ramp, and that any
damaged parts or warning labels be replaced immediately.

Summary of Contents for CHECK OUT ProMaster
















Reviews: